AI Chatbot for Bead Stores
SleekAI handles bead size, finish, hole diameter, stringing thread, and project picks from your real catalog, with BYO key for OpenAI, Anthropic, Google, or OpenRouter.
♾️ Lifetime License available
Built for beaders
Bead retail runs on millimeters and finish. A beadweaver starting a peyote bracelet wants Miyuki Delica 11/0 in a specific colorway, FireLine 6 lb in smoke gray, and a size 12 needle. A generic chatbot returns generic. SleekAI reads your wp_posts products, the bead size, finish (matte, AB, galvanized, duracoat), and hole diameter in postmeta, and returns the actual SKU at the actual count needed for a peyote bracelet at 7.5 inches wrist size.
Stringing thread is where projects survive or break. Bead size, hole diameter, and stress pattern determine which thread to use. A wire-wrapped earring takes 0.6 mm wire; a stretch bracelet takes Stretch Magic 0.7 mm; a knotted pearl strand takes silk size 6 with a knotting awl. Generic chatbots mix these up. SleekAI grounds in the meta and returns the right thread, the right needle, and the right closure (clamshell tip versus calotte versus French wire) from your real shelf.
Pattern classes and beadweaving series are how shops turn beginners into long-term regulars. If you run intro to peyote on Saturdays, a monthly Cellini spiral class, or a wire-wrapped jewelry intensive, SleekAI answers prerequisites, included-kit details, and skill-level questions from your event pages and routes interested beaders into the right next class.
Workflow
How a beadweaving question becomes a complete kit
Tag the catalog
Load pattern and class pages
Split bots by technique
/beadweaving/, a stringing bot on /stringing/, and a wire-wrap bot on /wire/. Each gets the right prompt scope.
Route to classes
Try it now
A typical Bead Stores conversation
Comparison
Generic chatbot vs SleekAI for bead stores
Generic chatbot
- Mixes Czech and Miyuki sizing
- Misses bead finish (matte, AB, galvanized)
- Can't pair thread to bead-hole diameter
- Confuses stringing materials by project
- Ignores your beadweaving class schedule
SleekAI chatbot
-
Reads size, finish, hole diameter from
postmeta - Pairs thread and needle by bead size
- Suggests closures and findings inside your stock
- Multibot for beadweaving, stringing, wire-wrap
- References your class and kit pages
Features
What SleekAI gives you for Bead Stores
Bead size and finish aware
Bead size in mm or seed-bead numeric, finish (matte, AB, galvanized, duracoat), and hole diameter live in product meta. The bot returns the right SKU at the right count for the project.
Thread and needle pairing
Stringing thread (FireLine, Nymo, KO, WildFire) and needle size pair to bead size automatically so projects survive past the first wear instead of failing on stress points.
Class awareness
Peyote, herringbone, right-angle weave, and wire-wrap class pages join the knowledge base. The bot answers prerequisites and routes interested beaders into your booking flow.
Use cases
Where bead stores use SleekAI
Peyote and beadweaving picks
Returns Delica counts, thread, and needle for peyote, herringbone, and brick stitch bracelets, necklaces, and earrings at the wrist or neck size the customer wants.
Stringing and wire-wrap
Pairs wire gauge, stringing thread, and findings to project type. Wire earrings get 22-gauge sterling; stretch bracelets get Stretch Magic 0.7 mm with crimp covers.
Class and kit signups
Routes beaders into peyote, herringbone, Cellini spiral, or wire-wrap classes. Conversation logs show class demand for next quarter's schedule.
The bigger picture
Why bead retail compounds on millimeters and finishes
Bead retail is one of the most detail-driven categories in craft. A 0.1 mm difference in bead-hole diameter is the difference between a thread that flows and a thread that breaks on the second pass. A generic chatbot does not know your Delica 11/0 hole diameter, does not know the difference between Permafinish and galvanized, and does not know which thread pairs with which seed bead.
The result is beaders who walk out with the wrong combination and never come back. A grounded bot wins by quoting real bead size, finish, and hole diameter from product meta, pairing thread and needle automatically, and proposing closures that fit project weight. The compounding effect is the second project.
A beader whose first peyote bracelet finished cleanly buys the second pattern, signs up for herringbone class, and asks about Cellini spiral within six months. The same logic applies on the wire-wrap side. Gauge, mandrel size, and finding compatibility are exactly the kind of detail a generic chatbot mangles.
The bot becomes a project rescuer rather than a service deflector. For shops running classes, the bot routes beginners into the right next workshop with prerequisites and kit details from your published pages, which lifts class fill without staff retyping. The conversation log feeds the quarterly buying review and surfaces which Delica colors or Czech finds are getting asked about before the next rep call.
Questions
Common questions about SleekAI for Bead Stores
Yes. Project specs (peyote width and length, herringbone tube circumference, right-angle weave pattern) feed the prompt alongside your bead-size meta. A 7.5 inch 10-bead-wide even-count peyote bracelet in Delica 11/0 needs around 5 grams. The bot returns weight, color suggestions in your real catalog, thread, and needle in one chat so the beader leaves with a complete kit instead of three half-guesses.
Yes. Hole diameter in bead meta and thread thickness in thread meta let the bot avoid the most common project failure: thread that does not fit through the bead or breaks on tension. FireLine 6 lb pairs well with Delica 11/0 peyote; Nymo D fits larger seed beads; KO thread handles cylindrical beads with smaller holes. The bot also matches needle size to the same constraint.
Yes. Multibot plus display conditions runs each technique as its own bot. The beadweaving bot on /beadweaving/ stays in peyote-herringbone-RAW territory. The stringing bot on /stringing/ focuses on Stretch Magic, silk, and Beadalon. The wire-wrap bot on /wire/ covers gauges, mandrels, and pliers. Each only sees products and pages relevant to its technique.
Add class and intensive pages to the knowledge base and the bot answers prerequisites, included-kit details, and skill-level questions. A beader asking whether Saturday peyote class is a fit gets the description from your page rather than guessed. Signup routes to your booking flow, and the conversation log shows which techniques are getting asked about for next-quarter scheduling.
Yes. Closure type (magnetic, toggle, lobster, hook-and-eye), size in mm, and material (sterling, gold-filled, plated) live in product meta. The bot pairs closure to bracelet weight and look. A heavier beaded bracelet gets a sterling toggle; a daily-wear bracelet gets a magnetic clasp. Crimp beads, clamshell tips, and French wire finishings pair by project.
Yours. SleekAI is bring-your-own-key for OpenAI, Anthropic, Google, or OpenRouter. Most bead-count and thread-pairing questions answer fine on GPT-4o-mini or Claude Haiku at a fraction of a cent per chat. Reserve a larger model for trickier work like adapting a pattern from Delica 11/0 to 15/0 where the math compresses by a factor of about two.
Yes. Finish (matte, AB, galvanized, duracoat, Permafinish, opaque) and color family in product meta let the bot match a customer's existing palette. A beader who already bought Delica DB0010 black asking for a coordinating coppery accent gets DB1837 duracoat dark berry as a real match from your stock. Finish-name confusion (galvanized versus Permafinish) gets resolved from real spec data.
Yes. Conversation logs surface re-stock signals and class demand. Repeated requests for a Delica color or finish you do not stock are a buying signal. Repeated questions about a technique you do not teach are a curriculum signal. The log feeds the quarterly buying review and informs which Miyuki release to order before the rep call. Beginner-to-regular conversion gets faster when the class schedule matches the demand pattern in chat.
Pricing
More than 1000+
happy customers
Explore our flexible licensing options tailored to your needs. Upgrade your license anytime to access more features, or opt for a lifetime license for ongoing value, including lifetime updates and lifetime support. Our hassle-free upgrade process ensures that our platform can grow with you, starting from whichever plan you choose.
Lifetime ♾️
Most popular
EUR
once
- Unlimited websites
- Lifetime updates
- Lifetime support
...or get the Bundle Deal
and save €250 🎁
The Bundle (unlimited sites)
Pay once, own it forever
Elevate your WordPress site with our exclusive plugin bundle that includes all of our premium plugins in one package. Enjoy lifetime updates and lifetime support. Save significantly compared to buying plugins individually.
What’s included
-
SleekAI
-
SleekByte
-
SleekMotion
-
SleekPixel
-
SleekRank
-
SleekView
€749
Continue to checkout