SleekView Charts for Popup Builder: real popup stats
SleekView queries the popupbuilder custom post type, the sgpb_subscribers table, the sgpb_subscription_form_data postmeta, and the popup statistics counters Popup Builder writes so you can chart shown counts, opt-in rate, and subscriber growth from inside WordPress.
♾️ Lifetime License available
Popup Builder has tons of data, no dashboard
Popup Builder by Sygnoos uses a popupbuilder custom post type for every popup, with configuration stored as sgpb-popup-options-{id} postmeta. Subscribers captured by Subscription popups land in a dedicated wp_sg_subscribers table with columns like firstName, email, subscriptionType, cDate, and status. The plugin also writes show and click counters into the popup's own postmeta whenever the Statistics module is enabled.
The default admin gives you a Subscribers list, a basic Statistics page, and a list of popups, but no real cross-popup analytics. SleekView reads the same custom post type, postmeta, and subscribers table without an export step and surfaces the missing dashboard: shows per popup, opt-in rate, subscribers per day, subscription type mix.
For a site running 10 to 30 popups with the Subscription module on, with several hundred subscribers a month flowing through wp_sg_subscribers, this becomes a four-chart dashboard that finally shows which popups perform, which weeks delivered the most leads, and which subscription types dominate the funnel.
Workflow
From popupbuilder posts to a real dashboard
Target the popupbuilder CPT
Join the subscribers table
Pull statistics meta
Mount on a popup dashboard
Sample dashboard
A popup dashboard built from Popup Builder data
New subscribers this month
Count
Subscribers by subscription type
Count
group by subscriptionType
Top popups by shows
Sum(sgpb-popup-statistics-show)
group by post_title
Subscriber growth over time
Count
group by cDate
Comparison
Popup Builder Statistics page vs SleekView
Default Popup Builder admin
- Popup Builder's Statistics page lists raw counts per popup, no trend lines
- Subscribers list shows rows but no breakdown by subscription type chart
- No way to combine subscriber growth with WooCommerce revenue charts
- Cannot restrict popup analytics to a marketing-only role without code
- No exit-intent versus on-load conversion comparison anywhere in admin
SleekView Charts
-
Charts directly off the
popupbuildercustom post type -
Reads the
wp_sg_subscriberstable for opt-in rows -
Sums
sgpb-popup-statistics-showpostmeta per popup - Mixes popup data with WooCommerce, FluentCRM, or BuddyBoss on one screen
- Per-role dashboards so marketing, ops, and editors see different views
Features
What SleekView Charts gives you for Popup Builder by Sygnoos
CPT plus custom table
SleekView can query both the popupbuilder custom post type and the wp_sg_subscribers custom table within a single dashboard. That covers both the popup catalog side and the lead capture side, with no custom plumbing needed between the two data sources.
Filter on subscriber status
wp_sg_subscribers carries a status column (1 active, 0 unsubscribed, plus rejection codes). Filter on status equals 1 plus cDate within the last 30 days to get clean active-only growth, or include all statuses to see churn versus growth at once.
Fast on big subscriber tables
Sites running Popup Builder for years can have tens of thousands of rows in wp_sg_subscribers. SleekView leverages the cDate and email indexes plus WordPress object cache, keeping pie and area queries responsive even on the largest installs we have profiled.
Audience
Where Popup Builder teams use SleekView
Identify the workhorse popups
The shows-per-popup bar surfaces the top 5 popups driving most impressions. Marketing concentrates A/B testing budget on those rather than spreading effort across long-tail popups that almost no one ever sees on the live site.
Track campaign launches
After a new content campaign, the daily subscriber area chart confirms whether the popup stack picked up the additional traffic. A flat line means the new pages forgot the popup; a rising line means the rollout reached the intended audience.
Compliance reporting
The status pie shows the share of active versus unsubscribed records in wp_sg_subscribers. Compliance can hand a CSV export of the unsubscribed segment to a privacy auditor without needing direct database access at all.
The bigger picture
Why a SleekView dashboard beats the built-in
Popup Builder is one of the most installed popup plugins on WordPress, used by 200,000 plus sites, and it stores a surprising amount of data locally. The base plugin gives you a Statistics page with per-popup counts and a Subscribers list with per-row entries, both useful, both limited. Neither answers the questions teams actually have in week-to-week marketing work.
Which popup converts best per impression? When did subscriber growth stall? Is the subscription type mix shifting? SleekView reads the same popupbuilder CPT, the same wp_sg_subscribers table, and the same statistics postmeta, then turns that data into a four-chart dashboard that lives inside WP admin. Marketing gets a single page where they can answer the questions the plugin's own admin cannot. Compliance gets clean status breakdowns.
Editors get a per-author view of which posts host which popups. The plugin keeps doing what it does best while SleekView fills the visualization gap that has always been there.
Questions
Common questions about SleekView Charts for Popup Builder by Sygnoos
The popupbuilder custom post type for the popup catalog, the wp_sg_subscribers custom table for opt-in rows, and the sgpb-popup-statistics-show and sgpb-popup-statistics-click postmeta values for impression and click counters. All three are written by the plugin without any add-on.
No. The popupbuilder CPT, wp_sg_subscribers table, and statistics postmeta exist in the free version. The Pro version adds advanced popup types and analytics extras, but every chart shown in the preview can be built off the free plugin's data alone.
Yes. SleekView supports calculated fields, so a chart can divide the sgpb-popup-statistics-click postmeta sum by the sgpb-popup-statistics-show postmeta sum per popup and display the result as a percentage Bar chart, with the highest-converting popups appearing first.
No. SleekView is strictly read-only against Popup Builder's tables and meta. It never inserts, updates, or deletes subscriber rows. The plugin remains the sole writer, so you can safely uninstall SleekView at any time without affecting your subscriber list or popup configuration.
Yes. Every SleekView dashboard supports role-based visibility. Build a Popup Dashboard restricted to the marketing role, and the team sees subscriber growth and shows-per-popup charts without needing any access to wp_sg_subscribers or the underlying plugin settings.
Not noticeably. SleekView leverages the existing cDate, email, and status indexes on wp_sg_subscribers and the meta_key index on wp_postmeta. Cache TTLs are configurable per chart so the most-viewed charts stay snappy even on installs with 100,000 plus subscriber rows.
Yes. Every chart exposes a CSV export of the underlying rows, including subscriber email, name, subscription type, and cDate. Use the export to feed marketing automation systems or to send a compliance auditor the exact subset of the list they have requested.
No. Popup Builder still designs and serves popups; SleekView just visualizes the resulting data. The two complement each other, with Popup Builder owning the front-end behavior and SleekView owning the analytics layer that lets the team compare popups and measure outcomes.
Pricing
More than 1000+
happy customers
Explore our flexible licensing options tailored to your needs. Upgrade your license anytime to access more features, or opt for a lifetime license for ongoing value, including lifetime updates and lifetime support. Our hassle-free upgrade process ensures that our platform can grow with you, starting from whichever plan you choose.
Lifetime ♾️
Most popular
EUR
once
- Unlimited websites
- Lifetime updates
- Lifetime support
...or get the Bundle Deal
and save €250 🎁
The Bundle (unlimited sites)
Pay once, own it forever
Elevate your WordPress site with our exclusive plugin bundle that includes all of our premium plugins in one package. Enjoy lifetime updates and lifetime support. Save significantly compared to buying plugins individually.
What’s included
-
SleekAI
-
SleekByte
-
SleekMotion
-
SleekPixel
-
SleekRank
-
SleekView
€749
Continue to checkoutBrowse more
- Yith Woocommerce Easy Login Register
- Yith Woocommerce Pdf Invoice
- Variation Swatches
- Yith Woocommerce Frequently Bought Together
- Yith Woocommerce Multi Vendor
- Woocommerce Tm Extra Product Options
- Woocommerce Product Add Ons
- Wt Woocommerce Sequential Order Numbers
- Woocommerce Blocks
- Wc Frontend Manager
- Woo Wallet
- Abandoned Cart Lite For Woocommerce
- Wpc Smart Wishlist
- Woocommerce Store Credit
- Yith Woocommerce Order Tracking
- Memberpress Corporate
- Ultimatemember Content Restriction
- Wp Courseware Members
- Buddydrive
- Memberium Infusionsoft
- Wp Private Content Plus
- Pmpro Multiple Memberships Per User
- Members Only
- Memberium Active Campaign
- Kleo Membership
- Restrict Content
- Pmpro Subscription Delays
- Profile Magic
- Buddypress Docs
- Theme My Login